Oracle Application Server 10g (9.0.4) Installation On Fedora Core 2 (FC2)

In this article I'll describe the installation of Oracle Application Server 10g (9.0.4), Oracle's J2EE Application Server, on Fedora Core 2. The article assumes you've performed the standard server installation including the development tools.

Download Software
Unpack Files
Hosts File
Set Kernel Parameters
Setup
Installation
Post Installation

Download Software

Download the following software:

Unpack Files

First unzip the files:

gunzip ias904_linux_disk1.cpio.gz
gunzip ias904_linux_disk2.cpio.gz
gunzip ias904_linux_disk3.cpio.gz
gunzip ias904_linux_disk4.cpio.gz

Next unpack the contents of the files:

cpio -idmv < ias904_linux_disk1.cpio
cpio -idmv < ias904_linux_disk2.cpio
cpio -idmv < ias904_linux_disk3.cpio
cpio -idmv < ias904_linux_disk4.cpio

You should now have four directories (Disk1, Disk2, Disk3 & Disk4) containing installation files.

Hosts File

The /etc/hosts file must contain a fully qualified name for the server:

<IP-address>  <fully-qualified-machine-name>  <machine-name>

Set Kernel Parameters

Add the following lines to the /etc/sysctl.conf file:

kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 142
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 256 32000 100 142
fs.file-max = 131072
net.ipv4.ip_local_port_range = 20000 65000
kernel.msgmni = 2878 
kernel.msgmax = 8192 
kernel.msgmnb = 65535

Run the following command to change the current kernel parameters:

/sbin/sysctl -p

Add the following lines to the /etc/security/limits.conf file:

*               soft    nproc   16384
*               hard    nproc   16384
*               soft    nofile  65536
*               hard    nofile  65536

Add the following line to the /etc/pam.d/login file, if it does not already exist:

session    required     pam_limits.so

Setup

Install the following packages:

# From Fedora Core 2 Disk 1
cd /mnt/cdrom/Fedora/RPMS
rpm -Uvh setarch-1.4-1.i386.rpm
rpm -Uvh tcl-8.4.5-7.i386.rpm
rpm -Uvh ORBit2-2.10.0-2.i386.rpm
rpm -Uvh libpng-1.2.2-22.i386.rpm

# From Fedora Core 2 Disk 2
cd /mnt/cdrom/Fedora/RPMS
rpm -Uvh libpng10-1.0.13-13.i386.rpm
rpm -Uvh gnome-libs-1.4.1.2.90-40.i386.rpm

# From Fedora Core 2 Disk 3
cd /mnt/cdrom/Fedora/RPMS
rpm -Uvh compat-libstdc++-7.3-2.96.126.i386.rpm
rpm -Uvh compat-libstdc++-devel-7.3-2.96.126.i386.rpm
rpm -Uvh compat-db-4.1.25-2.1.i386.rpm
rpm -Uvh compat-gcc-7.3-2.96.126.i386.rpm
rpm -Uvh compat-gcc-c++-7.3-2.96.126.i386.rpm
rpm -Uvh openmotif21-2.1.30-9.i386.rpm
rpm -Uvh pdksh-5.2.14-24.i386.rpm

# From Fedora Core 2 Disk 4
cd /mnt/cdrom/Fedora/RPMS
rpm -Uvh sysstat-5.0.1-2.i386.rpm

Put gcc296 and g++296 first in $PATH variable by creating the following symbolic links:

mv /usr/bin/gcc /usr/bin/gcc323
mv /usr/bin/g++ /usr/bin/g++323
ln -s /usr/bin/gcc296 /usr/bin/gcc
ln -s /usr/bin/g++296 /usr/bin/g++

Install the 3006854 patch:

unzip p3006854_9204_LINUX.zip
cd 3006854
sh rhel3_pre_install.sh

Create the new groups and users:

groupadd oinstall
groupadd dba
groupadd oper

useradd -g oinstall -G dba -s /bin/ksh oracle
passwd oracle

Create the directories in which the Oracle software will be installed:

mkdir -p /u01/app/oracle/product/904_j2ee
chown -R oracle.oinstall /u01

xhost +<machine-name>

# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR

ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/904_j2ee; export ORACLE_HOME
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$ORACLE_HOME/bin:$PATH; export PATH
PATH=$PATH:$ORACLE_HOME/dcm/bin:$ORACLE_HOME/opmn/bin; export PATH
PATH=$PATH:$ORACLE_HOME/Apache/Apache/bin; export PATH

#LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
#CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
LD_ASSUME_KERNEL=2.4.1; export LD_ASSUME_KERNEL

if [ $USER = "oracle" ]; then
  if [ $SHELL = "/bin/ksh" ]; then
    ulimit -p 16384
    ulimit -n 16384
  else
    ulimit -u 16384 -n 16384
  fi
fi

PS1="`hostname`> "
set -o emacs
set filec

Installation

Log into the oracle user. If you are using X emulation then set the DISPLAY environmental variable:

DISPLAY=<machine-name>:0.0; export DISPLAY

Start the Oracle Universal Installer (OUI) by issuing the following command in the Disk1 directory:

./runInstaller

The AS10g installer checks for required packages. It will produce the following list of missing packeges:

>>> Package gcc-3.2.3-20 is missing
>>> Package compat-gcc-7.3-2.96.122 is missing
>>> Package compat-gcc-c++-7.3-2.96.122 is missing
>>> Package compat-libstdc++-7.3-2.96.122 is missing
>>> Package compat-libstdc++-devel-7.3-2.96.122 is missing
>>> Package setarch-1.3-1 is missing
>>> Package sysstat-4.0.7 is missing
>>> Package gnome-libs-1.4.1.2.90-34.1 is missing
>>> Package libstdc++-3.2.3 is missing
>>> Package compat-libstdc++-devel-7.3-2.96.122 is missing
>>> Package compat-glibc-7.x-2.2.4.32.5 is missing

You can either quit and install these packages or continue with the installation as we've installed newer versions of them.

During the installation enter the appropriate ORACLE_HOME and name then continue with the installation.

Post Installation

With the installation complete you can perform any administration tasks using Enterprise Manager:

Connect to the Enterprise Manager Website (http://<fully-qualified-machine-name>:1810) using the username "ias_admin" and the password you assigned during the installation. If EM is not available start it with the "emctl start iasconsole" command.
Stop enterprise manager by issuing the "emctl stop iasconsole" command.

For more information see:

Oracle Application Server 10g Installation Guide

Hope this helps. Regards Tim...

Back to the Top.